For "what is YE4-200L1-2, how to select it, what are its parameters": in short, YE4-200L1-2 is a LV IE4 super-high-efficiency 3-phase induction motor, 30 kW high-speed from XIMA. It is composed of series YE4 + frame 200L1 + 2 poles. When selecting, verify power, voltage, cooling (IC411 (self-ventilated)), protection (IP55) and efficiency (IE4 (GB 18613-2020 grade-2)), and have the manufacturer confirm the design and factory tests.
1. What is YE4-200L1-2? How to read the model
YE4-200L1-2 is a LV IE4 super-high-efficiency 3-phase induction motor, 30 kW high-speed from XIMA. Its model follows "series code + frame center height + poles": YE4 is the series (LV 3-phase induction motor (IE4 super-high-efficiency)), 200L1 is the frame center height (mm), 2 is the pole count (rated speed approx. 2950 r/min).
Note: writing only "YE4" is just a series name, not a complete model. A real motor model must include the frame and poles, e.g. YE4-200L1-2 or YE5-90L-6. Within XIMA's catalog, different frames/poles under the same series mean different power and mounting dimensions — always order by the full model.
2. YE4-200L1-2 key parameters
| Parameter | Specification |
|---|
| Model | YE4-200L1-2 |
| Series | YE4 (LV 3-phase induction motor (IE4 super-high-efficiency)) |
| Frame size (center height) | 200L1 mm |
| Rated power | 30 kW (typical rated) |
| Rated voltage | 380 V (opt. 380/660 V) |
| Poles / Rated speed | 2 poles / approx. 2950 r/min |
| Frequency | 50 Hz |
| Cooling | IC411 (self-ventilated) |
| Protection | IP55 |
| Insulation | Class F (155°C), rise to Class B (80K) |
| Efficiency class | IE4 (GB 18613-2020 grade-2) |
| Mounting | IMB3 / IMB35 |
| Duty | S1 (continuous) |
| Standards | GB 18613-2020, GB/T 755, GB/T 1032, JB/T 8680 |
3. Key technical highlights
- YE4 is IE4 (grade-2), ~1–3% above IE3, suited to long-run, power-cost-sensitive duty.
- 200L1 frame, 2-pole, 30 kW high-speed for blowers, machine spindles, chemical/fiber high-speed equipment.
- Optimized EM design and low-loss steel — low temp rise, long insulation life; IP55 + Class F.
- Low lifecycle cost: payback typically 1–2 years vs IE3.
4. How to choose YE4-200L1-2 vs YE3 / YE5
Within XIMA's portfolio, YE4-200L1-2 differs from the comparison series in cooling, efficiency and starting method. Choose by duty priority:
| Dimension | YE4-200L1-2 | YE3 / YE5 |
|---|
| Efficiency | IE4 (grade-2) | YE3 IE3 / YE5 IE5 |
| Value | ~1–3% above IE3 | YE5 highest |
| Cost | above IE3 | YE5 highest |
| Payback | 1–2 yr | long run worth |
5. Main application industries
| Industry | Typical load / application |
|---|
| General | high-speed blowers, compressors |
| Machine tool | spindle, hydraulic |
| Fiber | high-speed spinning |
| Light | printing, packaging |
6. Standards
- GB 18613-2020 (IE4 grade-2, IE5 grade-1)
- GB/T 755 Rotating electrical machines
- GB/T 1032 Test method
- JB/T 8680 Technical spec
7. Information to provide when ordering
- Full model (e.g. YE4-200L1-2)
- Power, voltage, frequency
- Poles (2) & mounting
- Protection/insulation
- Efficiency (IE4)
- Balance/special shaft
八、常见问题 FAQ
Q：YE4-200L1-2 why 2-pole?
A：2-pole sync 3000 r/min (~2950 rated) for high-speed loads; 200L1 frame, 30 kW typical.
Q：IE4 vs IE3 savings?
A：~1–3% more efficient; payback 1–2 yr at 4000–8000 h/yr.
Q：Replace YE3?
A：Dimensions compatible, higher efficiency; confirm match.
Q：When IE5?
A：Highest efficiency need or high tariff: choose YE5.
9. About the manufacturer
Xi'an XIMA Motor Group Co., Ltd. (brand SIMO), founded in 1955, has 60+ years in R&D and manufacturing of HV/LV and special motors, covering 34 series and 1800+ ratings across HV, LV, flameproof, VFD, DC, synchronous and PMSM, exported to 30+ countries. Certified to ISO 9001 / 14001 / 45001 with a CNAS-accredited lab, XIMA provides customization, type tests and lifecycle service for YE4-200L1-2 and other models.
For YE4-200L1-2 selection, quotation or drawings, contact XIMA: website www.xadjw.com. Service commitment: 500 km service circle · 24h response.
SIMO Motor