TYKK800-4 0.96 kW 380V Rated Current 1.7A Technical Data

TYKK800-4 is a high-performance Permanent-magnet Synchronous Motor built by Xi'an XIMA Electric (Group) Co., Ltd., rated 0.96 kW, voltage 380V, rated current approx. 1.7 A, protection IP54, efficiency 97.5%. Based on real sample data, this guide covers model meaning, specifications, selection and FAQ.

1. What TYKK800-4 means: series ≠ model

Many buyers treat “TYKK” as a full model — a common mistake. The series code is only a product family; a complete motor model must include the frame size and pole/spec code. For TYKK800-4:

• TYKK — series code, Permanent-magnet Synchronous Motor;
• 800 — frame size (center height in mm);
• poles / spec — corresponds to synchronous speed 1500 r/min.

Only TYKK800-4 is the unique, orderable model; “TYKK” alone cannot pin down the spec.

2. Key specifications (real sample)

Note: above are library sample parameters; final values per XIMA datasheet and order confirmation.

3. Technical features

• Rare-earth PM rotor needs no field winding, giving higher efficiency and power density.
• No rotor copper loss or slip; stays efficient at partial load, saving energy.
• Compact, low inertia, fast dynamic response for precise speed/servo loads.
• Optional encoder and controller for torque/speed closed loop with VFD.
• Low temperature rise, low noise, minimal maintenance for continuous duty.

4. Adjacent frame selection

5. Typical industries

6. Standards

• GB 30253
• IEC 60034-30-1

7. Ordering notes

• State full model, power, voltage, speed/poles, mounting (IMB3/B5/V1) and protection/Ex level.
• Specify environment (temp, altitude, humidity, medium) and starting method (DOL/VFD/soft-start).
• Request special shaft, dual shaft, tachogenerator, encoder or brake at order time.
• Confirm cooling (IC411/IC416/IC611/IC81W) and matching cooler / inverter brand.
• Allow 10–15% power margin; confirm lead time, warranty and site commissioning scope.

8. FAQ

Q: What is the difference between “TYKK” and TYKK800-4?

A: “TYKK” is only the Permanent-magnet Synchronous Motor family code; TYKK800-4 adds frame and spec code and is the orderable model.

Q: What are the rated power and current of TYKK800-4?

A: Sample rated power approx. 0.96 kW, voltage 380V, rated current approx. 1.7 A; final per datasheet and order confirmation.

Q: Is frame 800 large? Any mounting notes?

A: 800 mm is a medium-large frame; bolt pattern per IMB3, foundation must be leveled, on-site guidance recommended.

Q: What is the protection / Ex level?

A: Protection IP54; for hazardous areas confirm the Ex mark and gas group.

Q: Why does efficiency 97.5% matter?

A: Higher efficiency cuts running cost and heat, ideal for continuous duty with short payback.

Q: How is TYKK800-4 cooled?

A: Cooling IC416 / IC411; keep cooling medium/air path clear under full load.

Q: Can it be customized?

A: Yes — voltage, speed, shaft, mounting, sensors and coating; state requirements at order.

Q: Where to get quote and datasheet for TYKK800-4?

A: Visit www.xadjw.com or contact Xi’an XIMA sales engineers for selection and quote.

9. About the manufacturer

TYKK800-4 is designed and built by Xi'an XIMA Electric (Group) Co., Ltd. (founded 1955), covering HV, LV, flameproof, VFD, DC and PM motors, shipped to 30+ countries. For datasheet, quote or customization of TYKK800-4, visit www.xadjw.com or contact a sales engineer.